According to the Eurasian Economic Union Technical Regulation TR EAEU 048/2019, the EAC certification requirements for energy efficiency of electric lamps, external power supplies, chargers, lighting fixtures, and related equipment are as follows:
I. Mandatory Certification Scope  
Lighting Fixtures  
Incandescent lamps, halogen lamps, fluorescent lamps (including those with built-in ballasts), high-intensity discharge lamps (HID)  
LED lamps and modules: including directional/non-directional luminaires, LED drivers  
Directional luminaires: such as spotlights, downlights, etc.  
Power Supplies  
External power adapters (EPS)
Battery chargers (including mobile phone/laptop chargers)  
Control devices  
Fluorescent lamp ballasts, LED control devices

II. Core Energy Efficiency Requirements  
Energy efficiency rating label  
Must be labelled with grades from A+++ (highest efficiency) to E (lowest efficiency)
The label must include: annual energy consumption (kWh), brightness (lumens), colour temperature (K)
Key limits
Product type    Core indicators    Limit basis
LED luminaires    Luminous efficacy (lm/W)    ≥85 lm/W (Grade A standard)
External power supply/charger    No-load power consumption    ≤0.5W
Average energy efficiency    ≥87%
Fluorescent lamp ballasts    Energy Efficiency Index (EEI)    ≤0.5 (A2 Grade)
Directional LED luminaires    Beam angle light flux ratio    ≥80%
Special requirements
LED luminaires must report Lumen Maintenance Rate (L70 lifespan ≥30,000 hours)
Chargers must support low-power mode (efficiency ≥78% at 10% load)

III. Certification Process  
Document Preparation  
Technical documents (circuit diagrams, BOM lists)  
Russian language label design drafts  
Factory ISO 9001 certificate (if applicable)  
Testing Items  
Energy efficiency testing: luminous efficacy, power factor, standby power consumption  
Durability testing: high-temperature ageing, switch cycle testing  
Safety compatibility: EMC (TR EAEU 020/2011)
Institutional Review  
Submit samples to an EAEU-accredited laboratory (e.g., Russian SPb SERT, Kazakhstani KazStandard)  
Factory inspection (mass production consistency verification)  
Certification and Marking  
Certificate validity period: 5 years  
Products must be affixed with the EAC mark + energy efficiency label  
4. Non-compliance Risks  
Market Access Restrictions: Uncertified products are prohibited from sale in Russia, Kazakhstan, Belarus, and other EAEU member states
Penalties: Fines of up to 30% of the product value + product destruction

Recall responsibility: Mandatory recall for mislabelled energy efficiency
V. Recommendations for businesses
Optimise design phase
Select high-efficiency LED chips (e.g. CREE, Lumileds)
Power supply solutions must comply with DoE VI level/CoC Tier 2 standards
Local compliance
Labels must include Russian and Kazakh bilingual markings
In Kazakhstan, additional registration of GbR RU D-type declaration is required  
Continuous Monitoring  
Regularly update test reports (regulations are frequently revised, e.g., new UV radiation limits added in 2023)  
Note: Full technical provisions are available in the original regulation TR EAEU 048/2019 Annex 8-12.  
It is recommended to engage a certification body (e.g., Shanghai Jinghe Industrial) for comprehensive compliance management.